Related Products
Introduction
The non-insulated ferrules is designed with a seamless barrel to contain loose wire strands for superior terminations Eases insertion of wire into terminal block Meets DIN, UL & CSA standards for wire containment Suitable for limited space panel.
Drawing and Details
| Item No. | L | W | D φ | C φ | A.W.G | Lead Section(mm2) |
| TEN 0206 | 6.0 | 1.4 | 1 | 0.7 | 26 | 0.2 |
| TEN 0207 | 7.0 | 1.4 | 1 | 0.7 | 26 | 0.2 |
| TEN 0208 | 8.0 | 1.4 | 1 | 0.7 | 26 | 0.2 |
| TEN 0306 | 6.0 | 1.5 | 1.1 | 0.8 | 24 | 0.3 |
| TEN 0308 | 8.0 | 1.5 | 1.1 | 0.8 | 24 | 0.3 |
| TEN 0505 | 5.0 | 1.7 | 1.3 | 1 | 22 | 0.5 |
| TEN 0506 | 6.0 | 1.7 | 1.3 | 1 | 22 | 0.5 |
| TEN 0508 | 8.0 | 1.7 | 1.3 | 1 | 22 | 0.5 |
| TEN 0510 | 10.0 | 1.7 | 1.3 | 1 | 22 | 0.5 |
| TEN 0512 | 12.0 | 1.7 | 1.3 | 1 | 22 | 0.5 |
| TEN 7506 | 6.0 | 1.9 | 1.6 | 1.3 | 20 | 0.75 |
| TEN 7508 | 8.0 | 1.9 | 1.6 | 1.3 | 20 | 0.75 |
| TEN 7510 | 10.0 | 1.9 | 1.6 | 1.3 | 20 | 0.75 |
| TEN 7512 | 12.0 | 1.9 | 1.6 | 1.3 | 20 | 0.75 |
| TEN 1006 | 6.0 | 2.2 | 1.8 | 1.5 | 18 | 1.0 |
| TEN 1008 | 8.0 | 2.2 | 1.8 | 1.5 | 18 | 1.0 |
| TEN 1010 | 10.0 | 2.2 | 1.8 | 1.5 | 18 | 1.0 |
| TEN 1012 | 12.0 | 2.2 | 1.8 | 1.5 | 18 | 1.0 |
| TEN 1507 | 7.0 | 2.5 | 2.1 | 1.8 | 16 | 1.5 |
| TEN 1508 | 8.0 | 2.5 | 2.1 | 1.8 | 16 | 1.5 |
| TEN 1510 | 10.0 | 2.5 | 2.1 | 1.8 | 16 | 1.5 |
| TEN 1512 | 12.0 | 2.5 | 2.1 | 1.8 | 16 | 1.5 |
| TEN 1518 | 18.0 | 2.5 | 2.1 | 1.8 | 16 | 1.5 |
| TEN 2507 | 7.0 | 3.3 | 2.6 | 2.3 | 14 | 2.5 |
| TEN 2508 | 8.0 | 3.3 | 2.6 | 2.3 | 14 | 2.5 |
| TEN 2510 | 10.0 | 3.3 | 2.6 | 2.3 | 14 | 2.5 |
| TEN 2512 | 12.0 | 3.3 | 2.6 | 2.3 | 14 | 2.5 |
| TEN 2518 | 18.0 | 3.3 | 2.6 | 2.3 | 14 | 2.5 |
| TEN 4009 | 9.0 | 3.9 | 3.2 | 2.8 | 12 | 4.0 |
| TEN 4012 | 12.0 | 3.9 | 3.2 | 2.8 | 12 | 4.0 |
| TEN 4018 | 18.0 | 3.9 | 3.2 | 2.8 | 12 | 4.0 |
| TEN 6010 | 10.0 | 4.8 | 3.9 | 3.5 | 10 | 6.0 |
| TEN 6012 | 12.0 | 4.8 | 3.9 | 3.5 | 10 | 6.0 |
| TEN 6015 | 15.0 | 4.8 | 3.9 | 3.5 | 10 | 6.0 |
| TEN 6018 | 18.0 | 4.8 | 3.9 | 3.5 | 10 | 6.0 |
| TEN 10-12 | 12.0 | 5.8 | 4.9 | 4.5 | 7 | 10.0 |
| TEN 10-15 | 15.0 | 5.8 | 4.9 | 4.5 | 7 | 10.0 |
| TEN 10-18 | 18.0 | 5.8 | 4.9 | 4.5 | 7 | 10.0 |
| TEN 16-12 | 12.0 | 7.2 | 6.2 | 5.8 | 5 | 16.0 |
| TEN 16-15 | 15.0 | 7.2 | 6.2 | 5.8 | 5 | 16.0 |
| TEN 16-18 | 18.0 | 7.2 | 6.2 | 5.8 | 5 | 16.0 |
| TEN 25-16 | 16.0 | 9.1 | 7.9 | 7.5 | 4 | 25.0 |
| TEN 25-22 | 22.0 | 9.1 | 7.9 | 7.5 | 4 | 25.0 |
| TEN 35-16 | 16.0 | 10.2 | 8.7 | 8.3 | 2 | 35.0 |
| TEN 35-25 | 25.0 | 10.2 | 8.7 | 8.3 | 2 | 35.0 |
| TEN 50-20 | 20.0 | 12.4 | 10.9 | 10.3 | 1 | 50.0 |
| TEN 50-25 | 25.0 | 12.4 | 10.9 | 10.3 | 1 | 50.0 |
| TEN 50-30 | 30.0 | 12.7 | 10.9 | 10.3 | 1/0 | 50.0 |
| TEN 50-32 | 32.0 | 12.7 | 10.9 | 10.3 | 1/0 | 50.0 |
| TEN 70-22 | 22.0 | 15.8 | 14.3 | 13.5 | 2/0 | 70.0 |
| TEN 70-25 | 25.0 | 15.8 | 14.3 | 13.5 | 2/0 | 70.0 |
| TEN 70-30 | 30.0 | 15.8 | 14.3 | 13.5 | 2/0 | 70.0 |
| TEN 70-32 | 32.0 | 15.8 | 14.3 | 13.5 | 2/0 | 70.0 |
| TEN 95-25 | 25.0 | 17.3 | 15.3 | 14.5 | 3/0 | 95 |
| TEN 95-30 | 30.0 | 17.3 | 15.3 | 14.5 | 3/0 | 95 |
| TEN 95-32 | 32.0 | 17.3 | 15.3 | 14.5 | 3/0 | 95 |
| TEN 95-34 | 34.0 | 17.3 | 15.3 | 14.5 | 3/0 | 95 |
| TEN 120-30 | 30.0 | 20.2 | 17.5 | 16.5 | 4/0 | 120 |
| TEN 120-32 | 32.0 | 20.2 | 17.5 | 16.5 | 4/0 | 120 |
| TEN 120-34 | 34.0 | 20.2 | 17.5 | 16.5 | 4/0 | 120 |
| TEN 120-38 | 38.0 | 20.2 | 17.5 | 16.5 | 4/0 | 120 |
| TEN 120-40 | 40.0 | 20.2 | 17.5 | 16.5 | 4/0 | 120 |
| TEN 150-32 | 32.0 | 23.0 | 20.6 | 19.6 | 250/300 | 150 |
| TEN 150-34 | 34.0 | 23.0 | 20.6 | 19.6 | 250/300 | 150 |
| TEN 150-38 | 38.0 | 23.0 | 20.6 | 19.6 | 250/300 | 150 |
| TEN 150-40 | 40.0 | 23.0 | 20.6 | 19.6 | 250/300 | 150 |
| TEN 185-32 | 32.0 | 23.9 | 21.4 | 20.2 | 250/300 | 185 |
| TEN 185-40 | 40.0 | 23.9 | 21.4 | 20.2 | 250/300 | 185 |